Recirculating Cooler / Chiller

Recirculating Cooler / Chiller

Julabo FL300 Recirculating Chiller / Cooler

The JULABO FL300 is the recommended recirculating cooler/chiller option for all

Scie-Plas horizontal and vertical cooled gel electrophoresis units. Unlike other chiller units, which are factory preset at 4°C, the working temperature of the FL300 can be set

anywhere between -20 and +40°C, making it ideally suited to many techniques ranging from standard cooled gel electrophoresis to IEF with IPG strips. PID (Proportional

Band, Integral, Derivative) control guarantees thermal stability within ±0.5°C of the set temperature, obviating the need for continuous operator monitoring.

Each unit can be easily cleaned and is supplied with a splash-proof keypad with a bright, easy-to-read LED that indicates the current temperature, while an RS232 interface is located at the front of each unit for PC connection and alarm shutdown. A lift-up cover

on the top of the unit allows access to the filling port, while another hinged tray serves as storage for the operating manual and installation documents. A removable venting grid provides ready access to the condenser and drainage tap for cleaning. All models include an easily visible level indicator for the coolant, whereas vents positioned at the front and rear allow multiple units to be placed side by side, saving space within the laboratory

Benefits include:

• Ergonomic design and easy operation
• Splash-proof keypad with integrated mains switch
• Large, bright LED
• Reliable microprocessor PID temperature control
• Filling level indicator
• Powerful immersion pumps - suitable for continuous operation
• Maximum permissible temperature of +80°C - in the return line from the unit to the chiller
• Easy access to filling chamber - via a hinged lid at the top of the unit
• Low liquid level protection with visible and audible alarm signal
• Integrated stainless steel bath tanks
• Removable venting grid for cleaning of the condenser
• Front drain
• No side vents - allow multiple units to be stacked alongside each other
• RS232 interface for PC connection
• IP class according to IEC 529: IP21

Technical specifications:

• Working Temperature Range -20 to +40°C
• Temperature Control PID; Temperature Stability ±0.5°C
• Display LED; Display Resolution 0.1°C
• Integrated Programmer: Not available
• Heater Capacity: 0W

• Refrigerant: R134a
• Pump Capacity Pressure: 350mbar; Flow rate: 15L/min
• Digital Interfaces RS232
• Filling Volume 3 to 4.5L
• Suitable Fluids: Water, water-glycerol & Julabo thermal bath fluids
• Fittings Barbed fittings for tubing of 8 and 12mm internal diameter
• Pump Connections: M16 x 1 male
• Dimensions (W x L x H): 25 x 50 x 60cm
• Weight: 41kg

Ordering information: