Vacuum Concentrator
Uniequip UNIVAPO Vacuum Concentrators
The UNIVAPO systems consist of a vacuum-tight rotor chamber and a microprocessor controller for temperature and time giving speedy concentration of samples. The preset relatively low rotational speed of the magnetically driven motor develops enough centrifugal force so that the retardation of boiling (foaming) is avoided. Samples are concentrated in a very gentle manner and are 99% recovered.
- Two sizes: UNIVAPO 100 and UNIVAPO 150 (with larger chamber and rotors)
- Application: For preparative protocols of DNA, RNA, proteins, peptides, amino acids, hormones, enzymes and analytical protocols
- Technical description: The rotor chamber is totally enclosed, double sealed with a special sealant and teflon coated as standard
- Drive: The motor is located in the lower section and transmits power through a magnetic coupling. The section is readily accessible via the bottom base plate.
- Heater: Tubular type heater with electronic temperature control
- Timer: Electronic time control to max. 9 hours 59 minutes or continuous
- Vacuum connection: A two-way metal vacuum valve is installed on the rear side with ½" nozzle
- Options: Teflon coated rotor chamber
Automatic bleeder valve lets air into rotor chamber (speed dependent control)
UNIVAPO 150 - 340W x 400D x 370Hmm.; Weight - 23 Kg.
Ordering information:
|
UNIVAPO 100H |
UNIVAPO 100 H vacuum concentrator with fixed temperature 40oC, heater / power switches; analogue vacuum gauge; teflon coated chamber and perspex lid |
|
UNIVAPO 100ECH |
UNIVAPO 100ECH vacuum concentrator ; temperature range from 30oC to 80oC; digital display of heating and time; analogue vacuum display; teflon coated chamber and perspex lid; programmable with RS232 and optional analysis software for temp. and time |
|
UNIVAPO 100H-Cool |
UNIVAPO-100H with cooling coil for cooling down with optional water chiller UNITHERM 4/14D |
|
UNIVAPO 1 5 0H |
UNIVAPO 150H vacuum concentrator with fixed temperature 40oC , heater / power switches and analogue vacuum gauge; teflon coated chamber and perspex lid |
|
UNIVAPO 150ECH |
UNIVAPO 150ECH vacuum concentrator; temperature range from 30oC to 80oC; digital display of heating and time; analogue vacuum display; teflon coated chamber and perspex lid; programmable with RS232 and optional analysis software for temp. and time |
|
UNIVAPO 150H-Cool |
UNIVAPO-100H with cooling coil for cooling down with optional water chiller UNITHERM 4/14D |
Accessories:
Disc Rotors for UNIVAPO 100:
|
72-11 |
Rotor for 72 Eppendorf tubes 1.5 or 2.0 ml. |
|
40-13 |
Rotor for 40 test tube, 12/13 mm. dia. |
|
24-18 |
Rotor for 24 test tubes, 18 mm. dia. |
|
10-24 |
Rotor for 10 test tubes, 24 mm. dia. |
|
16-15 |
Rotor for 16 x 15 ml. Falcon tubes |
|
Special 100 |
Special rotor (customer specifications) |
Disc Rotors for UNIVAPO 150:
|
144-11 |
Rotor for 144 Eppendorf tubes 1.5 or 2.0 ml. |
|
76-13 |
Rotor for 76 test tube, 12/13 mm. dia. |
|
46-18 |
Rotor for 46 test tubes, 18 mm. dia. |
|
30-24 |
Rotor for 30 test tubes, 24 mm. dia. |
|
Special 150 |
Special rotor (customer specifications) |
|
Micro4x100 |
Swing-out rotor for 4 microplates |
|
Deep2x100 |
Swing-out rotor for 2 deep well plates |
|
Deep4x100 |
Swing-out rotor for 4 deep well plates |
|
VRV-205/M |
2-way vacuum bleeder valve |
|
VRV-205/M4 |
4-fold vacuum manifold with vacuum bleeder valves |
|
VSS-206 |
Vacuum tubing kit, 1.5 metre long incl. other fittings |
|
VFBV |
Feed back valve made of Teflon |
|
UNITHERM 4/14D |
Water chiller UNITHERM 4/14D for cooling UNIVAPO from room temperature down to +16oC* (* RT = +22oC and the chiller is +1oC) Temperature range: -4oC to +14oC Water container capacity: 2 litre Power of pump: 18 litre/min. Digital display of temperature |
|
UNICRYO-MC-2L-60oC |
Unicryo cold trap, -60oC, 2 litre incl. analogue vacuum gauge, defrost heater and perspex lid |
|
UNICRYO-MC-2L-80oC |
Unicryo cold trap, -80oC, 2 litre incl. analogue vacuum gauge, defrost heater and perspex lid |
|
UNICRYO-MC-4L-60oC |
Unicryo cold trap, -60oC, 4 litre incl. analogue vacuum gauge, defrost heater and perspex lid |
|
UNICRYO-MC-4L-80oC |
Unicryo cold trap, -80oC, 4 litre incl. analogue vacuum gauge, defrost heater and perspex lid |
|
UNICRYO-MC-6L-60oC |
Unicryo cold trap, -60oC, 6 litre incl. analogue vacuum gauge, defrost heater and perspex lid |
|
UNICRYO-MC-6L-80oC |
Unicryo cold trap, -80oC, 6 litre incl. analogue vacuum gauge, defrost heater and perspex lid |
|
UNIJET II |
UNIJET II refrigerated aspirator water circulating vacuum pump. Final vacuum 4 mbar in ref. of 40C water temperature. Flow turnover 96 litre of air / min. Vacuum control variable incl. analogue vacuum gauge and digital temp. control. This pump can supply vacuum for 3 other pieces of equipment. |
