Rotary Evaporators
Eyela Rotary Evaporators
N-1001 Series
Features:
- Available with or without digital water bath or digital water / oil bath (no exposed elements)
- Clear and easy to use control panel
- Unique weight balancing slide jack and newly developed lock mechanism enable
smooth up / down motion and reliable lock - Extension slide on slide jack provides maximum lift of 260 mm. making it easy to handle trap bulbs and small flasks
- The condenser has a wide cooling area of 0.11 m². High cooling performance ensures stable recovery
- Base, jack, glassware and bath are made in compact design. Installation space is approximately 85% of the former model. The existing glassware components can be interchanged
- Standard model N-1001S has inclined double spiral condenser type. Trap type condenser for solvents with low boiling points and motorised jack type are also available
- Excellent corrosion resistant all Teflon seal (optional accessory) is available which is suitable for recovering the organic solvents with low boiling points
Options:
- Water bath with no exposed heating elements (choice of digital controls water or water / oil bath) which is separate from rotary evaporator so easy to empty
- Motorised jack
- Vertical glassware set (instead of inclined) with adaptor to prevent the condensed solution from being refluxed into the sample flask through the capillary feed tube
- Trap type condenser
Specifications:
|
Rotary Evaporator
|
|||||||||
|
Model
|
N-1001S
|
N-1001S-W
|
N-1001S-WD
|
||||||
|
Cat. number
|
216968
|
216948
|
216958
|
||||||
|
Type
|
without bath
|
with SB-1000 digital water bath
|
with OSB-1000 digital water / oil bath
|
||||||
|
Condenser
|
Standard diagonal condenser glassware
Cooling dimensions 0.11 m² (nozzle O.D. 10mm.)
|
||||||||
|
Evaporating flask
|
Pear shaped flask, 1 litre, NS24/40
|
||||||||
|
Receiving flask
|
Round bottom flask, 1 litre, ball joint, S35/20
|
||||||||
|
Rotary joint (vapour duct)
|
I.D. 18 mm. x 272 long mm. NS24/40
|
||||||||
|
Vacuum seal
|
Teflon + Teflon / Viton double seal
|
||||||||
|
Overall dimensions
|
660W x 320D x 510H (max. 760H) mm.
|
710W x 355D x 510H (max. 760H) mm.
|
730W x 380D x 510H (max. 760H) mm.
|
||||||
|
Net weight
|
8 kg.
|
11 kg.
|
12.5 kg.
|
||||||
|
Model
|
N-1001V
|
N-1001V-W
|
N-1001V-WD
|
||||||
|
Cat. number
|
214428
|
216978
|
216988
|
||||||
|
Type
|
without bath
|
with SB-1000 digital water bath
|
with OSB-1000 digital water / oil bath
|
||||||
|
Condenser
|
Vertical condenser glassware
Cooling dimensions 0.11 m² (nozzle O.D. 10mm.)
|
||||||||
|
Evaporating flask
|
Pear shaped flask, 1 litre, NS24/40
|
||||||||
|
Receiving flask
|
Round bottom flask, 1 litre, ball joint, S35/20
|
||||||||
|
Rotary joint (vapour duct)
|
I.D. 18 mm. x 178 long mm. NS24/40
|
||||||||
|
Vacuum seal
|
Teflon + Teflon / Viton double seal
|
||||||||
|
Overall dimensions
|
480W x 320D x 900H (max. 1150H) mm.
|
535W x 355D x900H (max. 1150H) mm.
|
550W x 355D x 900H (max. 1150H) mm.
|
||||||
|
Net Weight
|
8.5 kg.
|
11.5 kg.
|
13 kg.
|
||||||
|
Model
|
N-1001T
|
N-1001T-W
|
N-1001T-WD
|
||||||
|
Cat. number
|
216998
|
217008
|
217018
|
||||||
|
Condenser
|
Dewar condenser glassware
O.D. 110 x 340 mm.; I.D. 91 x 230 mm. (nozzle O.D. 10mm.)
|
||||||||
|
Evaporating flask
|
Pear shaped flask, 1 litre, NS24/40
|
||||||||
|
Receiving flask
|
Round bottom flask, 1 litre, ball joint, S35/20
|
||||||||
|
Rotary joint (vapour duct)
|
I.D. 18 mm. x 178 long mm. NS24/40
|
||||||||
|
Overall dimensions
|
480W x 320D x 730H (max. 980H) mm.
|
535W x 355D x 730H (max. 980H) mm.
|
550W x 380D x 730H (max. 980H) mm.
|
||||||
|
Net Weight
|
8.6 kg.
|
11.6 kg.
|
13.1 kg.
|
||||||
|
Common Specifications
|
|||||||||
|
Rotation speed
|
20 – 180 rpm.
|
||||||||
|
Evaporating capacity
|
20ml. / minute max. (water)
|
||||||||
|
Ultimate vacuum
|
4 mbar (399.9 Pa) or less
|
||||||||
|
Safety features
|
Fuse
|
Independent over-temperature shut off
|
|||||||
|
Jack function
|
Manual slide (weight balance slide + extension slide)
|
||||||||
|
Jack stroke
|
110 mm. + 150 mm. (weight balance slide + extension slide)
|
||||||||
|
Stand base
|
T shape base 400 mm. x 300 mm.
|
||||||||
|
Motor
|
Induction motor 25W
|
||||||||
|
Bath temp. range
|
-
|
ambient +5°C to 90°C
|
ambient +5°C to 180°C
|
||||||
|
Accuracy
|
-
|
± 1.5°C
|
± 1.5°C (Oil ± 3.0°C)
|
||||||
|
Display
|
-
|
Digital set and read out, min. figure 1°C
|
Digital set and read out, min. figure 1°C
|
||||||
|
Heater
|
-
|
1kW (drum heating) for water
|
1kW (drum heating) for water and oil
|
||||||
|
Bath size, Material and Capacity
|
-
|
I.D. 230 x 160 x 100H mm.; SUS 304; 3 litre
|
I.D. 253 x 135H mm.; SUS 304; 7 litre
|
||||||
|
Additional power plug
|
-
|
Max. 1A
|
Max. 1A
|
||||||
|
Ambient temperature
|
5 to 35°C
|
||||||||
|
Supply power
|
35VA
|
1035VA
|
|||||||
* Specifications are room temperature 20°C and rated power source (‘Electrical supply’)
* Evaporation capacity varies depending on the vacuum rate, bath temperature, cooling
water temperature, etc.
Ordering information:
|
Model
|
Description
|
|
N-1001S
|
Rotary evaporator with inclined glassware, without water bath
|
|
N-1001S-W
|
Rotary evaporator with inclined glassware and digital water bath (SB-1000)
|
|
N-1001S-WD
|
Rotary evaporator with inclined glassware and digital water / oil bath (OSB-2000)
|
|
N-1001V
|
Rotary evaporator with vertical glassware set, without water bath
|
|
N-1001V-W
|
Rotary evaporator with vertical glassware set and digital water bath (SB-1000)
|
|
N-1001V-WD
|
Rotary evaporator with vertical glassware set and Digital water / oil bath (OSB-2000)
|
|
N-1001T
|
Rotary evaporator with dewar condenser glassware, without water bath
|
|
N-1001T-W
|
Rotary evaporator with dewar condenser glassware and digital water bath (SB-1000)
|
|
N-1001T-WD
|
Rotary evaporator with dewar condenser glassware and digital water / oil bath (OSB-2000)
|
|
SB-1000
|
Water bath with digital control and display
|
|
OSB-2000
|
Water / oil bath with digital control and display
|
Flexible system configurations with a variety of peripheral equipment:
Options:
- Water Bath: SB-1000 digital; Water / Oil Bath: OSB-2000 digital
- Recirculating Chiller (COOL ACE Series): CCA-1111 benchtop; CA-1113 floor standing
- Vacuum Pumps and Aspirator
- DIVAC Series: Teflon diaphragm pumps to maintain stable pressure reduction and excellent vacuum status (3 models)
- DTC Series: Economical, lightweight and compact Teflon diaphragm vacuum pumps (3 models)
- A-1000S Aspirator: Low cost aspirator suitable for samples such as water or alcohol that do not affect drainage
· DPE Series Solvent Recovery units: Increase the recovery of sample subject to the drainage regulations (3 models)
· NVC-2100 Series Vacuum Controller: Increase the recovery of regulated solvent and prevent bumping
· UT Series Refrigerated Cold Traps: Trap harmful vapours efficiently (2 models)
SYSTEM 1: Enhances the recovery efficiency by low temperature circulator aspirator, consisting of:
- Rotary evaporator N-1001S-W
- Recirculating Chiller CCA-1111
- Water Jet Aspirator A-1000S
- Vacuum gauge with regulator VG-1000V (for A-1000S)
- Cooling hose set (2 x 2 metre, I.D. 9 mm.)
- Vacuum hose (1 x 5 metre, I.D. 6 mm., O.D. 15 mm.)
SYSTEM 2: Diaphragm vacuum pump is used instead of low temperature circulator aspirator, consisting of:
- Rotary evaporator N-1001S-W
- Recirculating Chiller CCA-1111
- Diaphragm Vacuum Pump DTC-21
- Cooling hose set (2 x 2 metre, I.D. 9 mm.)
- Vacuum hose (1 x 5 metre, I.D. 6 mm., O.D. 15 mm.)
SYSTEM 3: Enhances the recovery efficiency and traps the exhaust gas, consisting of:
- Rotary evaporator N-1001S-W
- Recirculating Chiller CA-1111
- Solvent Recovery Unit DPE-1220A
- Diaphragm Vacuum Pump DIVAC 1.2L
- Cooling hose set (3 x 2 metre, I.D. 9 mm.)
- Vacuum hose (1 x 5 metre, I.D. 6 mm., O.D. 15 mm.)
SYSTEM 4: Suitable for low boiling point solvents using -45°C cold trap, consisting of:
- Rotary evaporator N-1001T
- Water bath SB-350
- Mounting plate for vacuum controller N-NVC3
- Cooler ECS-50SS
- Vacuum Controller NVC-2100
- Diaphragm Vacuum Pump DTC-21
- Cooling hose set (2 x 2 metre, I.D. 9 mm.)
- Vacuum hose (1 x 5 metre, I.D. 6 mm., O.D. 15 mm.)
SYSTEM 5: Enhances the recovery efficiency by controlling the proper vacuum rate for each sample, consisting of:
- Rotary evaporator N-1001S-W
- Recirculating Chiller CCA-1111
- Vacuum Controller NVC-2100
- Diaphragm Vacuum Pump DIVAC 1.2L
- Cooling hose set (3 x 2 metre, I.D. 9 mm.)
- Vacuum hose (1 x 5 metre, I.D. 6 mm., O.D. 15 mm.)
SYSTEM 6: Traps exhaust air and conducts vacuum control, consisting of:
- Rotary evaporator N-1001S-W
- Recirculating Chiller CCA-1111
- Solvent Recovery Unit DPE-1220C
- Vacuum Controller NVC-2100
- Diaphragm Vacuum Pump DTC-21
- Cooling hose set (3 x 2 metre, I.D. 9 mm.)
- Vacuum hose (1 x 5 metre, I.D. 6 mm., O.D. 15 mm.)
SYSTEM 7: Enhances the recovery efficiency and traps the exhaust air. Also shuts out the odourous components, consisting of:
- Rotary evaporator N-1001S-W
- Recirculating Chiller CCA-1111
- Solvent Recovery Unit DPE-1120
- Diaphragm Vacuum Pump DIVAC 1.2L
- Cooling hose set (3 x 2 metre, I.D. 9 mm.)
- Vacuum hose (1 x 5 metre, I.D. 6 mm., O.D. 15 mm.)
Ordering information:
|
Cat. number
|
Description
|
|
SYS09112
|
Rotary Evaporator System 1
|
|
SYS09067
|
Rotary Evaporator System 2
|
|
SYS09092
|
Rotary Evaporator System 3
|
|
SYS09211
|
Rotary Evaporator System 4
|
|
SYS09093
|
Rotary Evaporator System 5
|
|
SYS09094
|
Rotary Evaporator System 6
|
|
SYS09095
|
Rotary Evaporator System 7
|
Wide variety of glassware and other optional accessories:
- Rotary joints
- Sample flasks (pear shaped)
- Receiver flasks
- Trap bulbs
- Test tube adaptors
- Coupling adaptors for different taper joints
- Separable flasks (consist of separable cover and separable sample flasks)
- Separable clamps (for separable flasks connection)
- Separable seal packing (for use with separable clamp)
- Capillaries
- Glass stopper
- Vacuum hose
- Teflon seal
- Three-way cock
- Bumping-free cap (safety cap)
- Cooling hose sets
- Vacuum hose
Eyela 10 Litre Rotary Vacuum Evaporators N-3000 and N-3000D
10 Litre Standard Type N-3000
- A new vacuum sealing system is made using the mechanical seal to ensure a long lifespan
- Easy to attach one touch clamp for the evaporator flask enables one person operation
- The lifting mechanism of the bath is motorised, so raising and descending of the bath is easy and smooth
- Inner bath heat (ambient +10°C to 180°C), rotation speed and vapour temperature are digitally displayed
- A trolley for easy mobility is supplied as standard
- A variety of safety features such as leakage control breaker, empty heating protector and heater malfunction alarm are incorporated
10 Litre Explosion-proof Model N-3000D
- Explosion-proof type that uses an air monitor that will not create heating electricity in its driving parts. This model is suitable for the concentration and recovery of solvents with low boiling points
- The bath can be moved up and down by just turning the handle
- A drain valve is fixed to the receiving flask, enabling collection of the condensed liquid under reduced pressure
Specifications:
|
Product name
|
10L Rotary Vacuum Evaporator
|
|
|
Model
|
N-3000
|
N-3000D
|
|
Cat. No.
|
221128
|
221138
|
|
Rotation speed
|
from 10 to 130 rpm.
|
|
|
Rate of evaporation
|
Max. 3.5 litre/hour (for water)
|
Depends on steam energy, cooling/operation conditions
|
|
Ultimate vacuum pressure
|
< 133.3 Pa (1 Torr)
|
|
|
Temperature range
|
ambient +10°C to 180°C
|
ambient +10°C to 80°C
|
|
Temperature accuracy
|
± 1°C (for water); ± 3°C (for oil)
|
|
|
Bath temperature control
|
P.I.D. microprocessor control
|
|
|
Safety functions
|
Thermal empty heating protector, independent overheat protector, ELCB, motor fuse, overflow duct, up/down limiter for the bath
|
|
|
Display
|
Bath temperature, sample flask rotation speed. Digital display
|
|
|
Bath lifting mechanism
|
Motorised auto-lifting system
|
Manual (circular handle)
|
|
Vacuum control functions
|
Stationary (1 – 760 mm. Hg / 1 – 1013 hPa
Automatic (vapour temp. sensor option)
Programme control (programmed for each of 10 typical solvents), step control
|
N/A
|
|
Heater
|
For temp. control, 3.5 kW
|
Heat exchanger
|
|
Driving motor
|
Induction motor 60W
|
Air motor 250W
|
|
Condenser
|
Vertical triple spiral tube, 0.5m²
|
|
|
Sample flask
|
Round shaped flask, 10 litre
|
|
|
Receiving flask
|
Round shaped flask, 5 litre, with drain valve
|
|
|
Vacuum seal
|
Mechanical seal
|
|
|
Bath dimensions (mm.)
|
Diameter 360 x 200H, 20 litre; material: SUS304
|
|
|
Connection size
|
Vacuum nozzle: OD 16 mm.; Cooling nozzle: OD 16 mm.
|
|
|
Bath height adjustment
|
145 mm. (motorised)
|
145 mm. (manual)
|
|
Ambient temperature
|
5°C to 35°C
|
|
|
Overall dimensions (mm) Weight
|
930W x 450D x 1890H
96 kg.
|
930W x 472D x 1890H
93 kg.
|
|
Input power
|
AC 220V; single phase, 3.8 kVA
|
|
