Benchtop Centrifuge for Oil Testing
Orto Alresa Digtor 20-C benchtop centrifuge for oil tests according to ASTM 96 and UNE 51028 standards
Orto Alresa’s specialisation in the field of centrifuges makes it possible to offer a model for determining water and mineral sediments in accordance with the ASTM D96 and UNE 51028 standards.Features:
- Digital control panel with variable speed selector in 100 rpm. increments, 0 to 60 minutes timer and continuous operation position, press button lid opening, pilot light to indicate rotor is turning and a pilot light indicating when the lid is open or not properly closed
- Interior is AISI 304 stainless steel with thermal insulation to maintain the equipment exterior at room temperature and seals made of wear-resistant material suitable for this type of test
- 18/8 stainless steel centrifuge chamber
- Heating control:
heating system with over-heating control for sample protection
sensor in the centrifuge chamber for precise temperature measurement
thermostatically controlled temperature in increments of 1°C from room temperature +5°C up to 70°C - Four archive and one floating memory, to record the time, speed and stopping with or without braking
- Audible and visual rotor imbalance signals, with automatic cut-out
- Push button lid opening with a device to prevent it from being opened when the rotor is turning
- Manual lid opening in the event of a power failure
- Automatic power supply disconnection after 15 minutes of non-operation
- Dimensions: 540W x 625D x 400H mm.
- Weight: 52 kg.
- 220V, 50 Hz
- Power: 850W
Ordering information:
|
Cat. number
|
Description
|
|
CE 107
|
Digtor C centrifuge with heating control, 220V, 50 Hz
|
|
Rotors
|
|
|
RT 212
|
Swing-out rotor for 4 x 100ml. ASTM conical tubes
max. speed 1,900 rpm / 860 x g.
|
|
RT 213
|
Swing-out rotor for 4 x 100ml. ASTM pear shaped tubes
max. speed 1,900 rpm / 839 x g.
|
