Orto Alresa Digicen 21R refrigerated benchtop centrifuge, 4 x 100ml.
Features:
- Induction motor, maintenance free
- Stainless steel chamber
- Max. speed: 16,500 rpm / 24,959 x g. (with 24 x 1.5/2.0ml. angle rotor)
5,300 rpm / 4,554 x g. (with 4 x 50ml. swing-out rotor)
- Temperature range from -20°C to +40°C in 1°C increments
- Temperature sensor inside the centrifuge chamber
- Microprocessor controlled
- Motorised lid latch
- Automatic rotor recognition
- Current values displayed in values or graphics
- Lights for short cycle, open lid, start and stop
- Last parameters on memory
- Radius selectable
- Backlit LCD screen and sealed keypad for selection of speed and time:
- speed in steps of 100 rpm, RCF in steps of 10 x g.
- time selection from 1 to 99 minutes and hold position
- braking ramps from 5 to 180 seconds
- temperature from -20°C to +40°C in 1°C increments
- Braking ramps from 5 to 180 seconds
- Countdown starts after selected speed is reached, or counts up from 0
- Short cycle key allows centrifuge to reach maximum speed while it is pressed
- Continuous verification about centrifuge state and accessories
- Up to 16 programmable memories can be stored
- Aluminium rotors, autoclavable
- Noise level: < 60 dB
- Initial checking and tracking via screen messages
- Lid dropping protection
- Rubber protection gasket around lip of centrifuge chamber
- Imbalance detection and switch-off
- Double manual emergency lid opening mechanism
- Lid lock so rotor will not run if lid open and lid will not open if rotor running
- Dimensions: 590W x 680D x 320H mm.
- Weight: 67 kg.
Ordering information:
|
Cat. number |
Description |
|
|
CE 113 |
Digicen 21R refrigerated benchtop centrifuge, 220-240V, 50-60 Hz |
|
|
Rotors and adaptors |
||
|
RT 143 |
Swing out rotor for 4 tubes of 50 ml. (encoder) max. speed 5,300 rpm / 4,554 x g., radius 145 mm. min. temperature -4°C |
|
|
RE 378 |
4 adaptors for 4 tubes of 50 ml. Herolab in 50 ml. |
|
|
RE 342 |
4 adaptors for 4 tubes Falcon of 50 ml. in 50 ml. |
|
|
RE 379 |
4 adaptors for 4 tubes of 30 ml. Herolab in 50 ml. |
|
|
RE 333 |
4 adaptors for 4 tubes of 30 ml. in 50 ml. |
|
|
RE 329 |
4 adaptors for 4 tubes of 10 ml. vacuum , 15 ml., 10 ml. Herolab or Falcon of 15 ml. |
|
|
RE 313 |
4 adaptors for 12 tubes of 5 ml. o 10 ml. |
|
|
RE 337 |
4 adaptors for 4 tubes of 5 ml. vacuum o 7/10 ml. vacuum . |
|
|
RE 326 |
4 adaptors for 36 tubes of Hemolisis of 10 x 100 mm. |
|
|
|
|
|
|
RT 138 |
Swing out rotor for 4 tubes of 100 ml. with hermetic lids (encoder) max. speed 5,000 rpm / 4,053 x g., radius 145 mm. min. temperature -4°C |
|
|
RE 380 |
4 adaptors for 4 tubes of 80 ml. Herolab |
|
|
RE 338 |
4 adaptors for 4 tubes of 80 ml. |
|
|
RE 381 |
4 adaptors for 4 tubes of 50 ml. Herolab |
|
|
RE 335 |
4 adaptors for 4 x 50ml. tubes in 100 ml. |
|
|
RE 341 |
4 adaptors for 4 x 50ml. Falcon tubes in 100 ml. |
|
|
RE 382 |
4 adaptors for 4 tubes of 30 ml. Herolab |
|
|
RE 332 |
4 adaptors for 4 tubes of 30 ml. |
|
|
RE 316 |
4 adaptors for 16 tubes of 10 ml. vacuum , 10 ml. Herolab or 15 ml. |
|
|
RE 339 |
4 adaptors for 4 x 15ml. Falcon tubes |
|
|
RE 320 |
4 adaptors for 20 tubes of 5 ml. vacuum , 7/10 ml. vacuum , 5 ml. or 10 ml. |
|
|
RE 408 |
4 adaptors for 20 microtubes of 1,5-2 ml. |
|
|
RE 355 |
4 lids for buckets of 100 ml. |
|
|
|
|
|
|
RT 150 |
Swing out rotor for 2, 4, or 6 microtitre plates max. speed 4,000 rpm / 1,842 x g., radius 103 mm. min. temperature 0°C |
|
|
RE 401 |
2 adapters for 72 x 1.5/2.0ml. microtubes in microtitre plates
|
|
|
|
|
|
|
RT 207 |
Swing-out rotor for 4 cyto-containers (encoded) |
|
|
PV 114 |
Set of cyto-containers (pack of 100) |
|
|
PP 323 |
Cyto-container (pack of 100) |
|
|
PP 324 |
Polypropylene tubes for cyto-container (pack of 100) |
|
|
PV 110 |
Slides (pack of 100) |
|
|
PV 111 |
Filters for cyto-container 7mm. diameter (pack of 100) |
|
|
PV 112 |
Filters for cyto-container 9.5mm. diameter (pack of 100) |
|
|
PV 113 |
Filters for cyto-container 12.5mm. diameter (pack of 100) |
|
|
|
|
|
|
RT 128 |
Rotor Horizontal for 24 tubes of 1,5 x 75 mm. lid included (encoder) max. speed 13,000 rpm / 16,249 x g., radius 86 mm. min. temperature 1°C |
|
|
|
|
|
|
RT 151 |
Angle fixed rotor 45º for 24 microtubes of 1,5-2 ml., hermetic. (encoder) max. speed 16,500 rpm / 24,959 x g., radius 82 mm. min. temperature 2°C |
|
|
RE 304 |
24 adaptors for 24 x 0.2 – 0.4ml. microtubes |
|
|
RE 305 |
24 adaptors for 24 x 0.5 – 0.6ml. microtubes |
|
|
|
|
|
|
RT 110 |
Angle fixed rotor 35º for 24 x 5 ml. tubes (encoder) max. speed 6,500 rpm / 5,338 x g., radius 113 mm. min. temperature 1°C |
|
|
|
|
|
|
RT 106 |
Angle fixed rotor 35º for 18 x 15ml. tubes (encoder) max. speed 4,200 rpm / 2,603 x g., radius 132 mm. min. temperature 0°C |
|
|
RE 383 |
18 adaptors for 18 tubes of 10 ml. Herolab |
|
|
RE 359 |
18 adaptors for 18 tubes of 7/10 ml. vacuum or 10 ml. |
|
|
RE 303 |
18 adaptors for 18 tubes of 5 ml. vacuum or 5 ml. |
|
|
|
|
|
|
RT 108 |
Angle fixed rotor 35º for 24 x 15ml. tubes (encoder) max. speed 4,200 rpm / 2,603/2,248 x g., radius 132/114 mm. min. temperature -1°C |
|
|
RE 384 |
24 adaptors for 24 tubes of 10 ml. Herolab |
|
|
RE 385 |
24 adaptors for 24 tubes of 7/10 ml. vacuum or 10 ml. |
|
|
RE 306 |
24 adaptors for 24 tubes of 5 ml. vacuum or 5 ml. |
|
|
|
|
|
|
RT 121 |
Angle fixed rotor 40º for 6 x 50ml. tubes (encoder) max. speed 6,000 rpm / 5,313 x g., radius 132 mm. min. temperature 1°C |
|
|
RE 386 |
6 adaptors for 6 tubes of 50 ml. Herolab |
|
|
RE 365 |
6 adaptors for 6 tubes Falcon of 50 ml. |
|
|
RE 387 |
6 adaptors for 6 tubes of 30 ml. Herolab |
|
|
RE 362 |
6 adaptors for 6 tubes of 30 ml. |
|
|
RE 361 |
6 adaptors for 6 tubes of 10 ml. vacuum , 15 ml., 10 ml. Herolab or n of 15 ml. Falcon tubes |
|
|
RE 360 |
6 adaptors for 18 tubes of 5 ml. or 10 ml. |
|
|
RE 364 |
6 adaptors for 6 tubes of 5 ml. vacuum or 7/10 ml. vacuum |
|
|
|
|
|
|
RT 152 |
Angle fixed rotor 30º for 12 x 10ml. tubes with hermetic lids (encoder) max. speed 15,000 rpm / 19,621 x g., radius 78 mm. min. temperature 4°C |
|
|
RE 389 |
12 adaptors for 12 tubes of 5 ml. vacuum or 5 ml. |
|
|
|
|
|
|
RT 153 |
Angle fixed rotor 30º for 8 x 30ml. tubes with hermetic lids (encoder) max. speed 13,500 rpm / 18,746 x g., radius 92 mm. min. temperature 4°C |
|
|
RE 406 |
8 adaptors for 8 tubes of 15 ml |
|
|
RE 407 |
8 adaptors for 8 tubes of 10 ml |
|
|
RE 391 |
8 adaptors for 8 tubes of 10 ml. Herolab |
|
|
RE 390 |
8 adaptors for 8 tubes of 5 ml. vacuum or 5 ml. |
|
|
|
|
|
|
RT 154 |
Angle fixed rotor 28º for 6 x 50ml. tubes with hermetic lids (encoder) max. speed9,000 rpm / 9,146 x g., radius 101 mm. min. temperature 1°C |
|
|
RE 392 |
6 adaptors for 6 tubes of 30 ml. Herolab |
|
|
RE 393 |
6 adaptors for 6 tubes of 30 ml. |
|
|
RE 394 |
6 adaptors for 6 tubes of 10 ml. vacuum or 15 ml. |
|
|
RE 395 |
6 adaptors for 6 tubes of 10 ml. Herolab |
|
|
RE 396 |
6 adaptors for 6 tubes of 10 ml. or 7/10 ml. vacuum . |
|
|
RE 397 |
6 adaptors for 6 tubes of 5 ml. vacuum or 5 ml. |
|
|
|
|
|
|
RT 183 |
Angle fixed rotor 45º for 32 x 0.2ml. microtubes tubes (4 strips of 8), hermetically sealed lid (encoder) max. speed 14,000 rpm / 12,700 x g., radius 58 mm. min. temperature 2°C |
|
