Boekel Slide Moat Hybridisation Oven

The Boekel Slide Moat™ is a versatile microscope slide incubator that is equally at home in a clinical or basic research laboratory. The Slide Moat™ has been specifically designed for the rigours of in situ hybridisation or denaturation and is superb for all slide drying and warming procedures used in histology, cytology or pathology laboratories.

The Slide Moat™ has an operating temperature range of 30°C to 100°C and uses a PID controller for easy temperature selestion, rapid heat up and superb stability. This unit has a tight fitting tempered glass lid which seals to an integral gasket on the heating base. The airtight lid seals in moisture and only a few drops of water are required to mintain a saturated atmosphere for overnight incubations. The Slide Moat™ accomodates up to 30 standard microscope slides (76 x 25 mm.) or specialty slides designed for in situ procedures.

Features:

• 30 standard microscope slides capacity
• PID temperature controller for easy temperature selection
• Tempered glass lid which seals with integral gasket on heating base
• Excellent temperature uniformity and stability

Specifications:

• Temperature range: ambient +5°C to 100°C
• Temperature stability: typically ± 0.2°C or better throughout operating temperature range
• Temperature uniformity: ± 0.35°C at 37°C; ± 0.7°C at 65°C
• Heat up rate: ambient to 65°C in 20 minutes
• Temperature setting / display: PID / LED
• Overall dimensions: 406W x 349L x 146H mm.
• Net weight: 8.2 kg.
• Clearance between lid and slide pedestal: 10 mm.
• 2 year warranty

NOTE: Boekel strongly recommends using covered and sealed slides for temperatures > 37°C or prolonged incubations > 1 hour

Ordering information: