Skadi Model CO155 CO2 Incubator, 155 litre

home  -   contact  -   site map
 

Skadi Model CO155 CO2 Incubator, 155 litre

Features:
  • Capacity: 155 litre
  • Dry wall heating system (direct heat type on all six walls) for uniform temperature and humidity as well as recovery after door opening; no need for fan circulation and so full use of top shelf space without drying out effect on samples
  • Stainless steel interior in one piece (deep drawn so no welding points!)
  • Exterior of scratch resistant, high impact painted finish
  • Tempered glass inner door is heated by outer door to prevent condensation
  • Removable, cleanable silicone inner door gasket and magnetic outer door gasket minimises heat loss from the chamber
  • Microprocessor control for temperature and CO2 with following features:
    • clear digital readout of temperature and CO2 in door mounted control panel
    • adjustable temperature and CO2 set points
    • adjustable high / low alarms
    • audible and visual alarms for temperature (high and low), CO2 (high and low), pressure, decontamination and door ajar
  • Temperature range: +25ºC* to +55ºC (factory set on +37ºC) (* at ambient temperature of + 20ºC)
  • Temperature variation: +/- 0.1 ºC; temperature uniformity: ± 0.4ºC @ 37ºc
  • Temperature recovery after door opening (30 sec): < 6 minutes
  • Equipped with decontamination program as standard: 9 hours on + 90ºC; very simple, just remove humidity from the tray and press button on panel
  • PT100 temperature sensor Class A
  • CO2 range: 0 - 20 %
  • CO2 setting accuracy: 0.1 %; CO2 uniformity: ± 0.05% at 5% CO2
  • CO2 recovery time after door opening (30 sec): < 6 minutes
  • CO2 test sample port in glass inner door for convenient access
  • Inlet pressure for CO2: 1 bar
  • Drift free dual beam IR (infrared) CO2 sensor
  • Humidity: > 95% RH;
  • Removable, autoclavable, heated water tray (1.65 litre) is used for humidity
  • Dry contacts for remote alarm (NO/NC/COM)
  • External Dimensions: 690W x 830D x 810H mm. (so can be underbench)
  • Internal Dimensions: 520W x 497D x 630H mm.
  • Packed dimensions: 940W x 825D x 1070H mm.
  • 3 stainless steel shelves (perforated)
  • Weight: 75 kg.; (packed weight: 93 kg.)
  • Stackable with assembly bars as standard with each unit
  • Operating ambient temperature between + 18ºC and 32ºC
  • Operating air humidity up to 60 % RH
  • 230 V / 50/60 Hz; Average power consumption: 0.06 kWh
  • Country of origin: The Netherlands

 


 
Search
Search Site:
Make an Enquiry

Brochures
Progen Focus 2008 Part 1 Download Adobe Acrobat Reader
Progen Focus 2009 Part 2 Food, Feed and Environmental Analysis Equipment from Progen Scientific
To view the brochures you will need to have Acrobat Reader
 
Site Build and Hosting by Wizzy Design Ltd.  |   Design By Website Optimisation  |   Powered By Apex CMS ©
Skadi Model CO155 CO2 Incubator, 155 litre © Progen Scientific. 2012. All Rights Reserved.