Loop Sterilisers

home  -   contact  -   site map
 

Loop Sterilisers

 

 

 
schuett Solaris Loop Steriliser
It’s magic – sterilise with light!
 
Features:
  • No gas, no open flame
  • Instant, ready to use, no warm-up time, no waiting
  • Sterilisation temperature 900ºC to 1300ºC
  • Touch-free START, with IR sensor and integrated timer
  • Economical. low cost operation
  • The schuett Solaris is the perfect solution if an open flame should be avoided or gas cartridges, etc. are not available
  • Used with standard electrical power
  • Reaches the safe working temperature of 900ºC to 1300ºC within a split second. No warm-up time, no excess heat, no energy consumption between work cycles
  •  START is generated by an infra-red (IR) sensor, which allows for efficient one handed operation
  • The integrated timer can be set to 5 or 7 seconds.
  • Pathogenic material is kept inside the sterilisation chamber. No spreading, no sooting
  • Optimal for use in laminar flow cabinets
  • Working angle adjustment
  • Robust and sturdy, no parts subject to mechanical wear, ideal for mobile operation in the field
 
Technical specifications:

 

Dimensions (W x H x D)
152 x 210 x 195 mm.
Weight
approx. 2.5 kg.

 

 
Ordering information :

 

Cat. number
Description
3.399.002
schuett Solaris Loop Steriliser, 230V
3.399.502
Quartz tube with bottom, external dimensions 17 mm. dia. x 100 mm. long (pack of 2)

 

 

 

schuett Flammy R Automated Flame Sterilisation Carousel

 
Features:
  • Time saving
  • Ease of operation
  • Versatile
  • Economical
  • Reliable
 
The schuett Flammy R is ideal for sterilisation of inoculating loops in combination with an optional gas safety burner e.g. schuett Phoenix II
Time saving:
Rotation and flame sterilisation happen automatically. No need for cooling down of inoculating loops in agar.
Ease of operation:
When needed, at the push of a button, all 5 inoculating loops can be flame sterilised on one full rotational cycle. The time for flame sterilisation can continuously be set from 2 to 10 seconds. Suitable for right and left handed use.
Versatile:
Can be used with all standard gas safety burners (adaptors are optionally available).
Economical:
Flame sterilisation time can be minimised to save gas and to increase lift time of inoculating loops.
Reliable:
No accidental useage of hot loops. Maintenance-free switches of the flame sterilisation carousel are covered inside the device, no malfunction due to dirt or stray light.
 
Technical specifications:
Dimensions (W x H x D)
100 x 345 x 160 mm.
Electrical
230V / 50 Hz
Weight
approx. 2 kg.
 
Ordering information :
Cat. number
Description
3.353.102
schuett Flammy R sterilisation carousel, 230V, supplied with 5 inoculating loop holders and connection cable
Accessory:
3.353.232
Flammy R glass splatter guard with cut-out to use with the flame sterilisation carousel
 
 
 
 
schuett Easyloop Semi-automated Flame Sterilisation Carousel
 
Features:
  • Time saving
  • Easy to use
  • Increases the life of inoculating loops significantly
  • For use with up to 6 inoculating loop holders simultaneously
 
The schuett Easyloop semi-automated flame sterilisation carousel is suitable for precise and time controlled flaming of 6 inoculating loop holders and inoculating loops.
The inoculating loop is placed into the carousel after use and is sterilised immediately after turning the holder into the flaming position, so that a sterile, cooled inoculating loop is available at any time.
The flame sterilisation carousel is operated on combination with schuett’s Phoenix II safety Bunsen Burner. The sterilisation time is precisely and infinitely adjustable (1 second to 120 minutes). The rotation is effected manually, while the flaming process is fully automated and only starts after the used inoculating loop has been turned to the flaming position. This saves time and gas consumption is minimised.
Thanks to the process time control, the life of the inoculating loops is significantly increased. The almost vertical flaming position of the inoculating loop facing the bottom, avoids running of contaminated liquid towards the inoculating loop shaft and inoculating loop holder. Due to this optimum position, the holders are flame sterilised in a way that prevents contamination even when inoculating from long tubes.
The carousel has been designed for continuous work flow with samples series.
 
Technical specifications:
Dimensions (W x D x H)
1
Weight
approx. 900g.
 
Ordering information :
Cat. number
Description
3.353.202
Schuett Easyloop semi-automated flame sterilisation carousel
 
 
 
schuett Easyflame Flame Steriliser
 
Features:
  • Mobile and handy device
  • For scarfing and flame sterilising
  • With piezoelectric ignition and air supply control for producing a ‘soft’ or a ‘sharp’ flame
  • Infinite adjustment of the flame
  • Highest operational safety
  • In short term use, the flame is activated as long as the push button is pressed
  • For continuous operation use the lock key
  • Suitable for all gas cartridges with 7/16” connection thread e.g. CG 1750, Express 444, AT 2000
 
Technical specifications:
Dimensions (W x H x D)
240 x 200 x 60 mm.
Weight
approx. 550g.
 
Ordering information :
Cat. number
Description
3.359.102
schuett Easyflame Flame Steriliser
3.359.202
Holder for mobile steriliser or cartridges, stainless steel
3.351.352
CG 1750 175g. gas cartridge propane/butane gas with screw-valve (pack of 6)
 
 

 


 
Search
Search Site:
Make an Enquiry
Brochures

 Download Adobe Acrobat Reader

To view the brochures you will need to have Acrobat Reader
 
Site Build and Hosting by Wizzy Design Ltd.  |   Design By Website Optimisation  |   Powered By Apex CMS ©
Loop Sterilisers © Progen Scientific. 2017. All Rights Reserved.