G7883/G7883CD Miele Laboratory Glassware Washers

home  -   contact  -   site map

G7883/G7883CD Miele Laboratory Glassware Washers

The Miele glass washing systems cover all the following aspects:

  • Cleaning, disinfection and drying: washer disinfector, baskets and inserts for laboratory equipment
  • Water preparation: different quality water for separate stages of a programme
  • Detergent : generally split into alkaline, pH neutral and acidic products
  • Cleaning programmes can be programmed and evaluated. Steps can include pre-wash, cleansing, neutralisation, rinses, final rinse and drying (optional)


  • G7883 – 39 narrow neck flasks or 116 pipettes or 1600 test tubes
  • G7883CD (with drying unit) – 37 narrow neck flasks or 96 pipettes or 1600 test tubes


  • Dimensions: G7883 – 820H (850 with lid) x 600W x 600D mm.
  • G7883CD – 820H (850 with lid) x 900W x 700 (600)D mm.
  • Can be freestanding or fitted under a workbench
  • Front loading machine with drop-down door
  • Stainless steel casing and lid
  • Space frame construction with side wall insulation for low heat and noise emissions
  • Wash chamber and spray arms in high grade stainless steel


  • Wash chamber with 2 levels for high capacity
  • Two spray arms (3rd. spray arm is in the upper basket) for  thorough cleaning 
  • Direct coupling of upper basket and injector mobile units to water feed
  • Inbuilt water softener system – continual reactivation during the cleaning process
  • Water intake controlled by fly wheel counter for correct ratios of cleaning and disinfecting agents, water softener reactivation, etc.
  • Four-fold suds filtration system with wide area filter, coarse filter, glass splinter filter and microfine filter
  • Drying unit / radial fan for hot air drying (model G7883CD) for thorough internal and external drying of laboratory glassware
  • Electro thermal door lock for safety
  • Serial interface RS 232 for PC or printer for process documentation 
  • AD pump for non-pressurised demineralised water feed
  • Steam condenser
  • Heat exchanger (G7883 only)
  • Access to check and control temperatures and temperature holding times
  • Full range of baskets, inserts and accessories
  • Requires 3 phase electrical connection

Dispenser system:

  • One dispenser each in the door for powder cleaning agent and liquid agents (rinsing agents)
  • One DOS 10/30 dispenser pump for liquid, acid agents
  • Connection for DOS G60 dispenser for  liquid cleansing agents (G7883 only)
  • One DOS 60/30 dispenser pump for liquid cleaning agents (G7883CD only)
  • Drawer with 2 x 5 litre containers (G7883CD only)

Programmable controls:

  • Multitronic Novo Plus with 8 standard cleaning programmes. Single knob programme selector switch


  • Programme sequence display
  • Temperature and programme duration
  • Programme end, optical and acoustic signal
  • Service and fault check lights

Control and safety features:

  • Two NTC probes in the sump for temperature monitoring and redundant temperature control
  • Electric door lock
  • Programme safety cut-out
  • Programme stopped in event of power failure


  • Optical interface for service technician
  • Serial interface RS 232 for PC or printer for process documentation

Optional extras:

  • One dispenser (DOS module G60) for liquid cleaning and disinfecting
  • Plinth, 300 mm. high
  • Machine lid (G7883CD only)

Search Site:
Make an Enquiry

   Progen Focus 2017


To view the brochures you will need to have Acrobat Reader
Site Build and Hosting by Wizzy Design Ltd.  |   Design By Website Optimisation  |   Powered By Apex CMS ©
G7883/G7883CD Miele Laboratory Glassware Washers © Progen Scientific. 2020. All Rights Reserved.