Benchtop Laboratory Freeze Dryers - CRYODOS
The CRYODOS is a laboratory freeze dryer specially developed for basic research in biotechnology and scientific institutes. The unit is designed and constructed according to GLP requirements. The equipment is easy to use and has very low service requirements.
General Features:
- Bench mounted table-top unit which houses the refrigeration system and the vacuum pump. Constructed in a steel stove enamelled cabinet with front door for maintenance purposes.
- Two stage vacuum pump: supplied with gas ballast to remove water vapour or other condensibles that could reach the pump. Exhaust filter provided.
- Air-cooled refrigeration system: hermetically sealed; ozone friendly refrigerant.
- Condenser: consisting of a co-axial coil inside a drum type manifold. A top transparent acrylic lid provides viewing of the ice forming process.
- Ready to work: the 8-off ¾" (18mm.) diameter rubber valves allow the connecting of several accessories to freeze dry simultaneously products in flasks (29/32mm. connection), vials or bulk, as required by the user.
- Hardness and durability: coil and drum constructed in AISI-316 stainless steel.
- Microprocessor controlled system: a digital screen gives direct read-out of current condenser and vacuum temperatures during the various stages of the cycle.
Technical Data:
|
|
CRYODOS -50 |
CRYODOS -80 |
|
Condenser capacity Kg. (of ice) |
4 (1.5 Kg./24 hours) |
4 (4 Kg./ 24 hours) |
|
Final temperature in condenser |
< -50oC |
< -80oC |
|
Number of compressors |
1 |
2 |
|
Nominal vacuum pump flow |
5 cu.m. / hour |
6 cu.m. / hour |
|
Basic unit weight |
60 Kg. |
90 Kg. |
|
Voltage (single phase) |
230V - 50/60 Hz |
230V - 50/60 Hz |
|
Total power |
1 kW |
1.5 kW |
|
Dimensions (W x D x H mm.) |
660 x 730 x 700 |
660 x 730 x 700 |
* All temperatures are given for room temperature of +21oC
Accessories:
- Stoppering chamber: glass cylindrical chamber with 3 non-thermostatised shelves and manual vial closing device. Includes 3 trays for vials and serum bottles. Dimensions 200mm. diameter x 250mm. high; trays 160mm. diameter with 75mm. between shelves
- Chamber: with 3 shelves and 3 trays for vials serum bottles and raw material.. Dimensions 200mm. diameter x 250mm. high; trays 160mm. diameter with 75mm. between shelves.
- 40 port manifold: 40 ports 13mm. outer diameter tube manifold to dry products in small glass tubes directly
- 8 port manifold: 8 ports 18mm. outer diameter tube manifold to dry products in vials or flasks directly including connection to CN 29/32
- Adaptor plate for manifolds: adaptor required to place manifolds on the base unit
- In-factory option of special vacuum pump specially prepared for freeze drying corrosive products.
Contact Progen Scientific for all your freeze dryer / lyophiliser requirements including 'Freeze Dryer Profile' questionnaire.
