Viscometers

home  -   contact  -   site map
 

Viscometers

A & D Instruments Viscometers

High Measurement Accuracy

Tuning-fork Vibration Method turns into reality for excellent repeatability of 1% of reading for viscosity measurement by Sine-wave Vibro Viscometer SV-10.

Low Viscosity Measurement And Wide Measurement Range

Low viscosity of 0.3 mPa·s ( cP ) to high viscosity of 10,000 mPa·s ( cP ) sample fluid can be measured without changing the sensor plates.

Real-Time Measurement

The sensor plate for the SV-10 is of a thin and small size, in area and in mass, making it is less influenced by the temperature change of the sample fluid and as a result the viscosity measurement tracks the change of viscosity of sample fluid.

 

Call... Enquire...
Call Progen Scientific to discuss your requirements on 0208 542 2283 Click here to make an enquiry online

Temperature Measurement

It is very important to measure the temperature of the fluid correctly because the viscosity is very much dependent upon the temperature of the fluid. SV-10 can detect accurate temperature immediately because the fluid and the detection unit (sensor plates) with small surface area/thermal capacity reach the thermal equilibrium in only a few seconds.

Continuous measurement

SV-10, Tuning-fork Vibration Method does not cause damage to the sample fluid and allows measurement of cloud point of samples such as surface active agents and of surface/interface changes such as wettability because of its excellent feature for wide measurement range without the need to replace the sensor plates.

Viscosity Calibration

With Viscosity Standard, viscosity calibration can be easily done. 1 point calibration or 2 points calibration is selectable in the calibration mode.

Non-Newtonian Sample Viscosity Measurement

Thin sensor plates allow little deformation of sample texture and thus enable measurement of stable viscosity values.

Foaming Sample Measurement

Low drive frequency of 30Hz allows measurement of foaming samples without breaking minute foams and with less influence scattering larger foams.

Flowing Sample Measurement

Even the viscosity of flowing samples can be measured, including liquid in turbulent flow, which enables field management with identical data used at the laboratories.

Separated type model

SV-10 is composed of the Display Unit and Main Unit offering excellent placement flexibility.

Vacuum Fluorescent Display

You can avoid unnecessary reading errors with easy-to-read, large, clear display: 13mm height for viscosity measurement and 11mm height for temperature measurement.

Small Sample Size

Standard sample cup requires the sample fluid of just more than 35 ml so you do not need to waste too much sample fluid.

Easy Cleaning

Due to the simple structure, the SV-10s sensor plates, temperature sensor and the protector made of stainless steel (SUS 304) can be easily and quickly cleaned.

Sol and Gel Measurement

Sol and Gel sample fluid like a starch can be measured during the change of material characteristic.

Standard RS-232C Interface

The RS-232C comes standard for your PC or Printer connectivity and the connection cable (25 pin – 9 pin) is also standard accessory for your convenience

 

 

Call... Enquire...
Call Progen Scientific to discuss your requirements on 0208 542 2283 Click here to make an enquiry online

 
Search
Search Site:
Make an Enquiry
Brochures

   Progen Focus 2017

 

To view the brochures you will need to have Acrobat Reader
 
Site Build and Hosting by Wizzy Design Ltd.  |   Design By Website Optimisation  |   Powered By Apex CMS ©
Viscometers © Progen Scientific. 2017. All Rights Reserved.