Power Supplies

Power Supplies

Labnet Enduro Electrophoresis Power Supplies

Features:

• Four parallel output terminals
• Timer 1 – 999 minutes or continuous and back-lit LCD display
• Select constant voltage, constant current or constant power (3A model only) mode
• Automatic crossover between modes protects gels
• Simple to programme (3A model only) and designed for safety with short circuit and over current / over voltage protection
• No load and load change detection systems incorporated into the software
• Compact (190W x 250D x 80H mm.), lightweight (2.2 kg.for 300V or 2.5 kg. for 250V) and with integral folding foot for better viewing

Uniequip UNIPACK Power Supplies

Scie-Plas Mini Power Supply Units

Scie-Plas MPSU-125/200 and MPSU-200/100 mini power supplies are an ideal low-cost option for use with small horizontal and vertical gel electrophoresis units. These compact,

lightweight, single-output power supplies are designed for applications requiring up to 125volts/200mAmps and 200volts/100mAmps. Both operate in constant voltage mode and are adjustable in 25-Volt increments. The operating current is displayed in milliamps on an LCD front panel. An optional MPSU-PA4 four-way power output adaptor allows a maximum of 4 gel electrophoresis units to run simultaneously at equal voltage.

Benefits include:

• 2 power supplies available: -
• MPSU-125/200 - 125V/200mA power supply - adjustable in 25 Volt increments
• MPSU-200/100 - 200V/100mA power supply - adjustable in 25 Volt increments
• Compact and lightweight
• LCD display
• Single power outlet - can be adapted for 4 gel electrophoresis units using th MPSU-PA4 power output adaptor
• Easy to use - just adjust the voltage dial
• Low cost - ideal for schools and colleges with tight budgets

Ordering information:

Replacement Parts & Accessories

Power Supply Accessories

Ordering information:

Consort EV200 Range Power Supply Units

The Consort EV200 power supplies cover the range of voltages and currents used with all Scie-Plas electrophoresis units, whether it is for routine low voltage horizontal and vertical gel electrophoresis or high voltage applications such as isoelectric focusing

and sequencing. The voltage and current can be adjusted at any time during a run, and are displayed on the unit in bright, easy-to-read digits. Nine different program settings, each with nine different parameters (except for EV222), allow more complex, multi-step techniques to be programmed and stored. All Consort EV200 power supplies include voltage ramping, automatic crossover and recovery after power failure as standard, in addition to full protection against overload and accidental short circuit.

The EV222 is an ideal, low cost power supply without the extensive programming, data transfer, etc. features of the other models

Benefits include:

• Compact, portable and safe
• Manual and method programming
• Constant voltage, current or power settings
• Automatic crossover
• Overload protection
• Short circuit protection
• Three-year warranty

Features common to all models:

• Parameter range: 1 - 100% of full scale
• Timer: 0 - 99.59 hours
• Volt-hours: 0 - 99.99kVh (except for EV222 - n/a)
• Display: LCD, 2 x 16 characters
• Resolution: 1V, 1mA, 1W
• Programmes: 9 x 9 set of parameters (except for EV222 - 1 x set of parameters)
• Buffer depletion detection: on/off, programmable
• No load detection: on/off, programmable
• Ground leakage detection; overload detection
• Computer control (except for EV222 - n/a)
• Data / logging: 3600 values (except for EV222 - n/a)
• RS232: 9600b/s (except for EV222 - n/a)
• Ambient temperature / relative humidity: 0 - 40°C; 0 - 95% non-condensing

Ordering information: