Labnet FastPette Pipette Controller
Comfortable control, precision dispensing
Labnet's new FastPette is a high performance motorized pipette controller designed for cordless work with glass or plastic pipettes in the 1-100ml range. User convenience was a top priority in the development of the FastPette. The contoured, lightweight handle and comfortable pushbuttons guarantee effortless pipetting even during extensive use. Even the control switches are located within easy reach of the thumb. A built-in stand allows resting of the FastPette on its back, even with a pipette full of liquid. A convenient wall hanger is also included.
- Max aspiration rate - 25ml in 4.3 seconds
- NiMH rechargeable battery for 8 hours of continuous use
- Ergonomic handle and controls
- Built-in stand
- Battery charger and Wall hanger included
- Fully autoclavable nose piece, pipette holder and filter
- Dual speed range
- Touch-control of aspiration rate
| Call... | Enquire... |
|---|---|
| Call Progen Scientific to discuss your requirements on 0845 430 8555 | Click here to make an enquiry about a biological safety cabinet |
Complete protection and safety
Many pipette controllers are not sufficiently protected against overfilling. When an aggressive liquid enters the body of a pipetting aid it may damage the internal mechanism and create a potential health hazard for the user. The FastPette is equipped with a safety valve that prevents any liquid from entering the unit. To protect against cross contamination, filters and pipette holders can be easily replaced and autoclaved.
Convenient control
Easily accessible switches on the FastPette allow different operation modes depending on the application. For aspiration, the user can choose HIGH or LOW work speed. Set to HIGH, the FastPette can fill a 25 ml pipette in just 4.3 seconds! Setting the speed to LOW enables precise measurement of the smallest volumes. Dispensing can be carried out by gravity (GRAV) or supported by the pump (BLOW) which enables complete emptying of the pipette with blow out. In addition, pipetting speed can be further controlled by the amount of pressure on the trigger buttons.
Always ready for action
A powerful, environmentally friendly NiMH battery enables up to 8 hours of continuous work. The low battery light indicates when the FastPette should be recharged. However, the FastPette is still fully operational when the power supply is plugged in, and the battery is charging. The FastPette battery is automatically protected against overcharging by a timing and thermal system. There is no need to worry about leaving it charging for extended periods.
Specifications:
- Weight: 215 g
- Battery Life: 8 hours of continuous use
- Battery charging time: 11-14 hours to full charge
- Autoclavable components: Nose piece, pipette holder, filter
- Filter: Hydrophobic PTFE 0.2 5m
- Pipette types: Glass or plastic 1-100 ml
Ordering Information:
| P2000-230UK | FastPette Pipette Controller |
| Call... | Enquire... |
|---|---|
| Call Progen Scientific to discuss your requirements on 0845 430 8555 | Click here to make an enquiry about a biological safety cabinet |




