Thermoreactors for applications such as C.O.D determinations

Thermoreactors for applications such as C.O.D determinations

Chemical Oxygen Demand (C.O.D.) is a measure of the quantity of oxygen used in biological and non-biological oxidation of material in water; a measure of water quality.

Programmable and Preset thermoreactors heating blocks) for applications such as C.O.D. tests

Features and benefits:

• Thermoreactors designed for C.O.D., total phosphorus, total chromium and other analytical decompositions for water and sludge samples
• Microprocessor control allows different settings of temperature and heating time to satisfy different demands
• The thermoreactors are (up to 160oC) able to accept a range of 8, 16 or 25 small test tubes
• Excellent temperature uniformity
• Auto shut off

F101A0127 Velp Thermoreactor Type ECO 8 with safety cover

• Selectable temperatures: 70oC, 100oC, 120oC and 150oC
• Selectable times: 30, 60, 120 minutes and infinite
• Number and diameter of holes: 8 x 16 mm. dia. and 1 x 22 mm. dia.
• Temp. probe: Pt 100 class A (auto-cal. by software)
• Visual or acoustic alarms and signals for reaching set temp. during time count, end of cycle, error or broken probe
• Temp. stability / homogeneity: +/- 0.3oC
• Performance: from 20oC to 150oC in 10 minutes
• Overtemperature protection on the block
• Dimensions: 135W x 230D x 95H mm. * Weight: 2 Kg.
• Power: 140 W

Accessories:

For sludge analysis:

F10100126 Velp Thermoreactor Type ECO 16 with temperature and timing microprocessor controlled, with digital display of temp. and time

• Electronic control of reaction temperature programmable from room temperature to 150oC in 1oC increments
• Number and diameter of holes: 14 x 16 mm. dia. and 2 x 22 mm. dia.
• Heating timer: up to 199 minutes or continuous
• Acoustic signal of end of cycle with auto switch off
• Dimensions: 168W x 269D x 110H mm. * Weight: 3.8 Kg.
• Power: 550 W

Accessories:

For sludge analysis:

F101A0125 Velp Thermoreactor Type ECO 25 with safety cover

• Selectable temperatures: 70oC, 100oC, 120oC and 150oC
• Selectable times: 30, 60, 120 minutes and infinite
• Number and diameter of holes: 25 x 16 mm. diameter
• Temp. probe: Pt 100 class A (auto-cal. by software)
• Visual or acoustic alarms and signals for reaching set temp., during time count, end of cycle, error or broken probe
• Temp. stability / homogeneity: +/- 0.3oC
• Performance: from 20oC to 150oC in 10 minutes
• Overtemperature protection on the block
• Dimensions: 155W x 275D x 95H mm. * Weight: 3.6 Kg.
• Power: 400 W

Accessories:

Upon request: