Furnace Controllers
controller specifications
Temperature Control Systems
|
EUROTHERM 2116 CONTROLLER This 48 X 48mm unit offers a single adjustable ramp
to one |
|
|
EUROTHERM 2416 CG PROGRAMMER This 48 x 48mm unit adds to the features of the 2116
alowing you to preset |
|
|
EUROTHERM 2408 CP PROGRAMMER This 48 x 96mm, high stability instrument extends the
features of the 2146 |
|
|
OTHER PROGRAMMES Eurotherm 2408 P4 and 2408cm as the 2408 CP but facility to store 4 or 20 programmes each of 16 segments |
|
permanent dwell temperature. This
feature is useful for gentle heating of ceramic work tubes or samples and
can limit the cooldown rate when the temperature is reduced. Both the set
temperature and the actual measured furnace temperature are simultaneously
displayed.
both the rate of
temperature rise or fall, and the length of time at a constant
temperature. A total of 8 segments each of which can be used as a ramp,
step or dwell.
and allows you to
preset programmes of 16 segments, each of which can be used as a ramp,
step or dwell.Please note many other systems are available, please contact our design team for more information.
Optional Extras
Overtemperature protection
An independant overtemperature protection system to give protection for both the furnace or any furnace contents at any temperature. Using an additional Eurotherm alarm working from a seperate thermocouple.
Digital Communications
RS232 allowing a single controller to communicate with a computer .
RS485 Allowing multiple controllers to communicate by "Daisychaining"
Software
Dos or Windows software is available
Cascade control
Available when close monitoring of the work load is important an additional thermocouple is placed close to the load and a second controller is fitted. The thernocouple sends signals to the normal temperature controller which in turn adjusts the element temperature.
Chart Recorders
A wide selection of both analogue and graphic recorders are available on request.
To view the brochures you will need to have Acrobat Reader
