Precision Incubators

home  -   contact  -   site map
 

Precision Incubators

Model P3

The Precision Incubator range combine traditional styling with modern controls for advanced temperature control.

Construction

All precision incubators have stainless steel chambers, adjustable aluminium shelves and a toughened inner glass viewing door(s). The outer cabinet is rust-resistant and finished in powder coated paint. Two 12mm access ports are provided so that cables for shakers or monitoring probes can be passed into the incubator.

Heating

The heating system has a profiled element to eliminate 'hot-spots'. Polyurethane insulation is foamed in-situ to help ensure optimum temperature control. Operation of the incubator at or below room temperature can be achieved when the cooling coil is connected to a source of chilled water (e.g. self contained recirculating cooler unit).

Temperature Control

All models have gentle fan-assisted air circulation via full-width ducts to ensure optimum temperature stability throughout the chamber. When the incubator door is opened, the fan stops so that any heat loss is kept to a minimum.

The microprocessor PID temperature controller maintains the set temperature to within 0.1°C. The easy to use temperature controller shows both 'target' and 'actual' temperatures. Indicators show when the heater is active and if an over temperature condition exists. The independent over temperature safety cut out is easily set by the user.

Dual Temperature Cycling (Ref: DTC) between two preset temperatures is an optional extra on all models.

The entire range of LEEC precision incubators (regardless of age) can be cooled when connected to a self contained recirculating cooler unit.

Technical Specifications

Model

PFC2

P3

P33

Temperature Range

Control

Variation

Recovery

5° above ambient to +60°C

±0.1° at +37°C

±0.25°C

Approx. 3 minutes

5° above ambient to +60°C

±0.1° at +37°C

±0.5°C

Approx. 4 minutes

5° above ambient to +60°C

±0.1° at +37°C

±1.0°C

Approx. 6 minutes

Chamber Capacity

150 litres

320 litres

730 litres

Shelves

4

6

6

Castors

No

No

Yes

Dimensions External (mm's)

Internal (mm's)

880h x 635w x 660d

590h x 510w x 490d

1550h x 635w x 660d

1275h x 510w x 490d

1550h x 1270w x 660d

1275h x 1140w x 490d

Power Rating

450 Watts

480 Watts

600 Watts

Weight

75 Kg's

120 Kg's

225 Kg's



*Temperature up to +90°C to special order. Control near or below ambient temperature requires a recirculating cooler.

Standard Features

Control

  • Microprocessor PID control of temperature to 0.1°C.
  • Over temperature safety cut out is set digitally.
  • Large LED digital display.

Construction

  • High quality stainless steel chamber.
  • CFC-free insulation.
  • Toughened inner glass doors.

Optional Extras

  • Chart recorder.
  • Audible alarm.
  • Alarm monitoring.

Ordering Information

PFC2

150 litre, stainless steel chamber, fan circulation, cooling coil

P3

320 litre, stainless steel chamber, fan circulation, cooling coil

P33

730 litre, stainless steel chamber, fan circulation, cooling coil, lockable wheels



 
Search
Search Site:
Make an Enquiry
Brochures

   Progen Focus 2017

 

To view the brochures you will need to have Acrobat Reader
 
Site Build and Hosting by Wizzy Design Ltd.  |   Design By Website Optimisation  |   Powered By Apex CMS ©
Precision Incubators © Progen Scientific. 2020. All Rights Reserved.