Custom Built Rooms

Custom Built Rooms

LEEC walk-in rooms are designed and built using experience gained in over 50 years of temperature control in incubator design. LEEC rooms will meet very high performance criteria at a competitive price. Temperature stability performance of better than ±1°C and a humidity control of ±3% are typical.

Alarm and monitoring of the room parameters can be conveniently achieved using the LAM100 system. A NAMAS traceable calibration certificate is supplied with every temperature controlled room.

Available in the following formats and designed to your specifications:

• Heat only

• Cool only

• Heat and cool

• Heat and humidify

• Heat, cool and humidify

Construction

All rooms are constructed from interlocking insulated panels incorporating polyurethane foam insulation of between 60mm and 100mm thickness, dependant on the specification requirements. These panels meet or exceed European specifications for 'Fire Retardation' and 'Surface Spread of Flames'.

Floors are normally insulated and given a non-slip finish for safety. Specialist finishes are also available. Some applications can be specified without an insulated floor.

Internal and external wall surfaces are usually of corrosion resistant steel finished in a food safe plastic laminate. Stainless steel is recommended when the room is to be humidified or possibly exposed to potentially corrosive vapours.

Hinged doors have an external lock and an internal safety release mechanism. Sliding doors can also be fitted to larger rooms.

Temperature Control

Rooms with operating control from -20°C to above +60°C have all been successfully installed. Incubator rooms typically have temperature control to better than 1°C.

Microprocessor controllers automatically call for heating or cooling only as required, in order to achieve optimum temperature stability with maximum operating efficiency. (This is in marked contrast to other systems which constantly overcool and then have to add excessive heating power in order to achieve the required temperature).

For cooled incubator and refrigerator applications direct cooling is usually specified. Indirect cooling, where chilled water is circulated through a heat exchanger, is often the method of choice in humidified rooms. An over temperature safety cut out is always fitted as standard.

Humidity Control

Environmental applications requiring humidity control are commonly found in the pharmaceutical and materials testing industries. A microprocessor controller regulates the ultrasonic fine mist generator to increase the humidity within the room only as required. This gives the LEEC system outstanding accuracy and economy in use.

Lighting Control

Rooms for use in seed germination & plant propagation will require specialised shelving and lighting control. Overhead lights are automatically switched on and off at predetermined times in order to simulate day and night conditions. Rooms for this application will always have cooling and dual temperature cycling as standard.

Shelving

An extensive range of shelving is available for use in these rooms. Shelving can be made from stainless steel, aluminium, chrome plated wire, etc. dependant on the users requirements.

Additionally, a wide selection of internal fittings can be supplied, including standard benching, sinks and fume extract units. Alternatively, LEEC rooms can be supplied empty to take the customer's own fixtures & fittings.

Optional Extras

• Chart Recorder.
• Panic Alarms.
• Alarm monitoring.
• Various types of racking and shelves