Alarm Monitoring System
The LAM100 alarm monitoring system has been
developed in response to demand for a user friendly monitoring
system.
The high precision LAM100 is a 16 channel unit which uses proven microprocessor electronics to provide a flexible system to meet the accreditation needs of most discerning users. The basic system provides essential alarm monitoring with a permanent record from a built-in printer. Its alarm system is constantly searching for out-of-limit conditions as small as 0.1 ° C. Not only will the LAM100 alert staff in the laboratory in the event of any alarm, but it can also activate a remote alarm or autodial facility.
This flexible system is designed to expand with laboratory requirements, up to a fully integrated 160 channel data logging facility when linked to a PC.
A NAMAS traceable calibration certificate is supplied with every LAM100 system.
Typical Monitoring Applications Include :-
|
Hospitals |
Incubators, ovens, waterbaths, refrigerators, freezers, bloodbanks, pharmacy fridges, etc. |
|
Food Industry |
Incubators, ovens, hotrooms,waterbaths, cold stores, freezer stores, etc. |
|
Pharmaceuticals |
Incubators, ovens, hotrooms, coldrooms, refrigerators, freezers, stavility test cabinets, environmental chambers, etc. |
|
Industrial |
Monitoring critical temperatures in research, pilot plant and production facilities, storage areas, etc. |
LAM 100 Standard Features
- 16 Seperate channels each with: Range -200°C to +300°C or 0-100% dependant on probe type. System accuracy and display resolution to 0.1°C or 0.1%, dependant on probe type. Overtempurature alarm. Undertemperature alarm. Alarm delay.
- Security key prevents tampering with set parameters.
- Audible and visual alarms with mute facility.
- Contacts for remote alarm or autodialler.
- Non-volatile memory never losses programmed parameters.
- Built-in printer with:
- Automactic daily printout of data for each channel.
- Manual printout of data for each channel.
- Automatic printout in alarm gives date, time, measured value and alarm limits.
- Re-print frequency in alarm state can be set between 1 and 99 minutes.
- Connection to RS232 interface for a datalogging on PC.
Typical Daily Printout Typical Alarm Printout
- Free data Logging software (ref. LAM2000) stores all data from up to ten LAM100 units (total of 160 channels). Stored data can be retrieved and printed in table or graph format via your PC. The LAM2000 software also has the facility for each channel to be given a brief description or cabinet location.
Probe Types Include:-
- Standard temperature probe - range -50°C to +100°C.
- Extended temperature probe - range -100°C to +150°C.
- Standard humidity probe - range 0 to 100%RH.
- CO2 probe - range 0 to 10% CO2.
- O2, and other sensors with 4-20mA linear output etc.
Accessories Include:-
- Uninterruptible power supplies (Ref: UPS)
- Remote alarms Box (Ref: RAB)
- Battery operated autodialler (Ref: AD)
Installation and Commissioning
The LAM100 is easy to install and simple to use and understand. Full Instructions are detailed in the operator manual. Progen are able to offer an installation and commissioning service.
Written estimates will be given only after a site survey. User training is part of the commissioning procedure.
To view the brochures you will need to have Acrobat Reader
