Laboratory Gas Burner. Phoenix Gas Safety Burner

Laboratory Gas Burner

Phoenix gas safety burner

Laboratory
Gas
Burner. Phoenix Gas
Safety Burner. The intelligent and flexible laboratory gas burner offers fantastic digital technology. You activate it by moving your hand in front of the display or by using the foot-switch.

Listed below are the special features offered with the Phoenix laboratory gas burner.

Sensor operation:
Sensitivity of IR sensor individually set by user with digitally adjustable sensor distance and preset time (1 sec. to 99 min.) after which flame stops.

Foot-switch mode 1:
Gas supply and electronic ignition are activated automatically by foot-switch. Gas supply cut off and flame stops when foot-switch is released

Foot-switch mode 2:
Flame comes on when foot-switch pressed once and stops when pressed again or the preset time has elapsed

Flame monitoring - safety feature will automatically re-ignite gas if flame inadvertently extinguished. Gas supply automatically cuts off if re-ignition fails after 10 seconds and digital fault report displayed
Ergonomic controls for adjusting gas and air supply plus multifunction control for adjusting burn-time and modes of operation
Gas saving features
Adaptability to various power / gas supplies (natural gas, gas canister or gas cartridge) gives flexibility of use and location

Call...	Enquire...
Call Progen Scientific to discuss your requirements on 0845 430 8555	Click here to make an enquiry online about laboratory gas burner.

Ordering information for the laboratory gas burner:

3.353 102 Phoenix with sensor and stainless steel foot-switch

Optional accessories:

3.351 262 Gas safety hose for natural gas (0.75 meter)
3.351 272 Gas safety hose with threaded screw connections for
propane/butane (0.5 metre)
3.351 282 As per 3.351 272 but 2.0 metre long
3.351 212 Adaptor for connection of CV360 gas cartridge (52g. butane)
3.351 222 Adaptor for connection of C206 gas canister (190g. butane)
incl. pressure reducing valve and gas safety hose (0.5 metre)
3.351 300 Gas cartridges CV360 (pack of 6)
3.351 310 Gas canisters C206 (pack of 6)
3.351 232 Circular glass spatter guard
3.351 242 Stainless steel flame shield
3.351 292 Stainless steel hot tray (for supporting vessels above flame)

NOTE: Range of innoculating loops and accessories available. Details on request

-------------------------------------------------------------------------------------------------

Schuett Flammy R flame sterilisation carousel

Schuett
Flammy
R flame
sterilisation carousel. Gas Burner Sterilisation Features:

Used in combination with the laboratory Schuett Phoenix gas safety burner for automatic flame sterilisation of inoculation loops. Simply place the inoculating loop onto the carousel for it to be rotated forward to the gas safety burner for flame sterilisation. The next inoculating loop is immediately available
The carousel can be used with 5 inoculating loops i.e. there is always enough time for the cooling process so there is always a sterile and cool loop available
All control elements are arranged on the front control panel including flame sterilisation time (2 to 10 seconds) and the option to flame sterilise all 5 inoculating loops at the push of a button
The vertical positioning of the inoculating loop holder prevents the contamination of the loop with dropping particles and the Flammy R is suitable for right or left handed operation
The maintenance-free switches are covered inside the device thus preventing a malfunction due to dirt or stray light
Flammy R is supplied with 5 stainless steel inoculation loop holders and loops of stainless steel or platin-iridium are also available

Ordering information for sterilisation carousal: