Kern Moisture Analysers

home  -   contact  -   site map
 

Kern Moisture Analysers

Kern MLS-A Series Moisture Analysers

Moisture analysers  with 49 memory possibilities and graphic display

 

Features:

  • Halogen quartz glass heater 400 W
  • Heating temperature range: 50 - 160°C in 1°C increments
  • Weighing range: max. sample weight 65 g. (MLS 65-3A) or 150 g. (MLS 150-2A
  • Read-out: 0.001 g. / 0.01% (MLS 65-3A) or 0.01 g. / 0.05% (MLS 150-2A)
  • Strain gauge weighing technology
  • Reproducibility, weight of sample 2 g.: 0.5% (MLS 65-3A)
  • Reproducibility, weight of sample 10 g.: 0.05% for MLS 65-3A) or 0.2% for MLS 150-2A
  • 3 displays: previous drying time: current temperature; moisture display  in %; current moisture content in %
  • Switch off criteria:

-  when the set time has expired (3 min. - 99 min.)

-  when the weight loss per unit of time falls below the target value; both values freely adjustable

  • Display after drying:

- Moisture (%) = loss in weight of starting weight (0 - 100%)

- Dry mass (%) = residual weight of starting weight (100 - 0%)

- Loss in weight / final weight x 100% (0 - 999%)

- Residual weight = absolute value in g.

NOTE: Display can be switched between the above 4 displays at any time

  • Measured value monitoring (recall of Measurement): Interval adjustable from 1 - 99 seconds (only in combination with Kern printer YKB-01N or PC)
  • Last measured value remains in display until replaced by a new measurement
  • Extended functions:

- Memory for automatic sequence of 49 complete drying processes. 10 free digits for each memory

- Easy to use

- Display in German and English

  • Application table with many practical examples in the operating instructions
  • 10 aluminium sample plates 92 mm. dia. provided (option MLB-A01, pack of 80)
  • Calibration by external weight (not supplied)
  • RS232 C data interface for connection to PC or printer
  • Mains adaptor (supplied)
  • Overall dimensions: 250W x 360D x 175H mm.
  • Net weight: approx. 6 kg.
  • 3 year warranty

 

Specifications:

Model

Weighing range g.

Readability

Heating temp. range

MLS 65-3A

65

0.001g. or 0.01%

50 - 160°C in 1ºC

MLS 150-2A

150

0.01 g. or 0.05%

50 - 160°C in 1ºC

Accessories:

Cat. Number

Description

YKB-01N

Standard printer

MLB-A01

Aluminium sample plates 92 mm. dia. (pack of 80)

MLS-A04

Calibration set consisting of measurement sensor and display device

RH-A02

Round fibreglass filter e.g. for samples that splash or become encrusted (pack of 80)

 

 

Kern MLB 50-3N Moisture Analyser

First class standard for moisture analysis

 

Features:

 

  • 2 halogen quartz glass heaters (200 W each for total 400 W)
  • Heating temperature range: 50 - 160°C in 0.1°C increments
  • Weighing range: max. sample weight 50 g.
  • Read-out: 0.001 g. or 0.01%
  • 3 displays: temperature; drying in %; drying time
  • Switch off criteria:
    • when the set time has expired (10 min. - 9 h. 50 min.)
    • when constant weight per adjustable time unit has been achieved (1 – 59 seconds)
  • Display after drying:
    • Moisture (%) = loss in weight of starting weight (0 - 100%)
    • Dry mass (%) = residual weight of starting weight (100 - 0%)
    • Loss in weight / final weight x 100% (0 - 999%)

      NOTE: Display can be switched between the above 3 displays at
      any time
  • Measured value monitoring (recall of Measurement):
    • Interval adjustable from 1 180 seconds (only in combination with Kern printer YKB-01N or PC)
  • Last measured value remains in display until replaced by a new measurement
  • Application table with many practical examples in the operating instructions
  • 10 aluminium sample plates 92 mm. dia. provided (option MLB-A01, pack of 80)
  • Calibration by external weight (not supplied)
  • RS232 C data interface for connection to PC or printer
  • Mains adaptor (supplied)
  • Overall dimensions: 210W x 335D x 156H mm.
  • Net weight: approx. 6 kg.
  • 3 year warranty
 

Specifications:

Model
Weighing range g.
Readability
Heating temp. range
MLB 50-3N
50
0.001g. or 0.01%
50 - 160°C

 

Accessories:

Cat. Number
Description
YKB-01N
Standard printer
MLB-A01
Aluminium sample plates 92 mm. dia. (pack of 80)
MLB-A11
Calibration set consisting of measurement sensor and display device
RH-A02
Round fibreglass filter e.g. for samples that splash or become encrusted (pack of 100)
ALS-A02
Protective working cover
 
 
 
 
 

Kern MLS 50-3HA160N Moisture Analyser

Moisture analyser with 99 memory possibilities and graphic display

 
Features:
  • 2 halogen quartz glass heaters (200 W each for total 400 W))

  • Heating temperature range: 50 - 160°C in 0.1°C increments
    • 4 drying methods: standard drying; gentle drying; drying in levels; pre-heat level
  • Weighing range: max. sample weight 50 g.
  • LCD graphic display, back-lit displaying the following:
    • display in moisture %
    • momentary moisture proportion in %
    • print interval 30 seconds
    • print edition in moisture %
    • switch-off mode
    • drying method standard
    • drying time up to now
    • status bar
    • present temperature
    • drying method standard
    • target temperature
    • drying process active
  • 3 displays: temperature; drying in %; drying time
  • Switch off criteria:

    • when the set time has expired (1 min. - 9 h. 59 min.)
    • when loss in weight per unit of time falls below the target value,both values freely adjustable (mg. / second)
  • Display after drying:
    • Moisture (%) = loss in weight of starting weight (0 - 100%)
    • Dry mass (%) = residual weight of starting weight (100 - 0%)
    • Loss in weight / final weight x 100% (0 - 999%)
    • Residual weight (absolute value in g.)

      NOTE: Display can be switched between the above 4 displays at any time
  • Measured value monitoring: Interval adjustable from 1 second – 5 minutes (only in combination with Kern printer YKB-01N or PC)
  • Last measured value remains in display until replaced by a new measurement
  • Application table with many practical examples in the operating instructions
  • 10 aluminium sample plates 92 mm. dia.provided (option MLB-A01, pack of 80)
  • Calibration by external weight (not supplied)
  • RS232 C data interface for connection to PC or printer
  • GLP/ISO record keeping
  • Balance contains memory for automatic sequence of 99 complete drying processes. 12 free digits for each memory
  • 'Weighing-in' help to a defined target value (g.) with adjustable tolerance range 1% - 25% of target value
  • Simple step by step user guidance in the display
  • Can be connected to PC keyboard
  • Internal clock for date and time
  • PC keyboard can be connected
  • Mains adaptor (supplied)
  • Overall dimensions: 210W x 335D x 156H mm.
  • Net weight: approx. 6.3 kg.
  • 3 year warranty
 

Specifications:

Model
Weighing range g.
Readability
Heating temp. range
MLS 50-3HA160N
50
0.001g. or 0.01%
50 - 160°C

 

Accessories:

Cat. Number
Description
YKB-01N
Standard printer
MLB-A01
Aluminium sample plates 92 mm. dia. (pack of 80)
MLB-A11
AUTO temperature calibration set with automatic adjustment function using RS232C
RH-A02
Round fibreglass filter e.g. for samples that splash or become encrusted (pack of 100)
 

Kern MRS 120-3 Moisture Analyser

Perfect drying with numerous functions and options

 
Features:
  • Halogen quartz glass heater 400 W

     

  • Heating temperature range: 30 - 230°oC in 1°C increments
    • 3 drying methods: standard drying; gentle drying (final temp. achieved after 4 min.) or preheating stage (0.1 - 99 min.)
  • Weighing range: max. sample weight 124 g.
  • Read-out: 0.001 g. or 0.01%
  • 4 displays: results in g or %; temperature; heating mode; temperature and time
  • Switch off criteria:
    • when the set time has expired (1 minute to 9 hour 59 minute)
    • when constant weight has been achieved
    • when loss in weight per unit of time falls below the target value, both values freely adjustable (g. / min.) or (% / min.)
    • weight loss (abs. value in g.)

  • Display after drying:
    • Moisture (%) = loss in weight of starting weight (0 - 100%)
    • Dry mass (%) = residual weight of starting weight (100 - 0%)
    • Loss in weight / final weight x 100% (0 - 999%)
    • Residual weight (absolute value in g.)
      NOTE: Display can be switched at any time
  • Measured value monitoring: Interval adjustable from 0.1 - 10 minutes with automatic number sampling (only in combination with Kern printer YKB-01 or PC)
  • Calibration by external weight (not supplied)
  • Last measured value remains in display until replaced by a new measurement
  • Application table with many practical examples in the operating instructions
  • Sight window over the sample is extremely useful during initial adjustment
  • 30 aluminium sample plates 92 mm. dia.provided (also MLB-A01, pack of 80)
  • RS232 C data interface for connection to PC or printer
  • GLP/ISO record keeping
  • Balance internal memory for automatic processing of 20 complete drying processes.
  • 'Weighing-in' help to a defined target value (g.) with adjustable tolerance range
  • Simple step by step user guidance in the display
  • Internal clock for date and time as standard
  • Mains adaptor (supplied)
  • Protective working cover over the keypad (replaceable as PR-A25 )
  • Overall dimensions: 210W x 340D x 170H mm.
  • Net weight: approx. 6.3 kg.
  • 3 year warranty
 

Specifications:

Model
Weighing range g.
Readability
Heating temp. range
MRS 120-3
124
0.001g. or 0.01%
30 - 230°

 

Accessories:

Cat. Number
Description
YKB-01N
Standard printer
MLB-A01
Aluminium sample plates 92 mm. dia. (pack of 80)
MRS-A01

Temperature calibration set consisting of calibration plate with measurement sensor and analysis box

RH-A02
Round fibreglass filter e.g. for samples that splash or become encrusted (pack of 100)
PR-A25
Protective working cover

 

 

Kern Model DBS 60-3 Moisture Balance

Modern moisture balance with 10 memories and graphic display

                                   
Features:
  • Halogen quartz glass heater 400 W
  • Heating temperature range: 50 - 200°C in 1°C increments
  • Weighing range: max. sample weight 60 g.
  • Reproducibility, weight of sample 2g.: 0.15%
  • Reproducibility, weight of sample 10g.: 0.02%
  • Read-out: 0.001 g. or 0.01%
  • Single cell weighing technology
  • Observation window over the sample, useful during initial adjustment
  • Backlit LCD display, digit height 14 mm.:
-        previous drying time
-        current temperature
-        unit for displaying the results e.g. % moisture
-        current moisture content in %
-        drying mode / status display drying
  • Display after drying:
- Moisture (%) = loss in weight of starting weight (0 - 100%)
- Dry mass (%) = residual weight of starting weight (100 - 0%)
- Loss in weight / final weight x 100% (100 - 999%)
- Ratio weight loss x 100% (0 – 999%)
- Weight loss (absolute value in g.)
NOTE: Display can be switched at any time
  • Drying modes:
-        standard drying
-        drying in levels
-        gentle drying
-        pre-heat level, can be switched on
  • Internal memory for automatic sequence of 10 drying programmes and 100 drying processes carried out
  • Switch off criteria:
- when the set time has expired (1 minute to 4 hours)
- when loss in weight per unit of time falls below the target value (30 seconds)
   Sample description for up to 99 samples, 2 digits, freely programmable, and is printed in the measuring protocol
  • Date and time display as standard
  • Table of applications: There are many practical examples in the operating instructions
  • Last measured value remains in display until replaced by a new measurement
  • Recall of measurement: Interval can be set from 1 second – 10 minutes (only when used with printer Kern YKB-01 or PC)
  • Application table with many practical examples in the operating instructions
  • 10 aluminium sample plates 92 mm. dia. provided (option MLB-A01, pack of 80)
  • Calibration by external weight (not supplied)
  • Multiple weighing units
  • RS232 C data interface for connection to PC or printer
  • Mains adaptor (supplied)
  • Overall dimensions: 202W x 336D x 157H mm.
  • Net weight: approx. 4.2 kg.
  • 3 year warranty
 
Specifications:

 

Model
Weighing range g.
Readability
Heating temp. range
DBS 60-3
60
0.001g. or 0.01%
50 - 200°C

 

Accessories:

 

Cat. Number
Description
YKB-01N
Standard thermal printer
911-013
Matrix needle printer
MLB-A01
Aluminium sample plates 92 mm. dia. (pack of 80)
DBS-A01
Calibration set consisting of measurement sensor and display device
RH-A02
Round fibreglass filter e.g. for samples that splash or become encrusted (pack of 100)
DBS-A02
USB interface (interface cable, driver and software Balance Connection included)

 

 
 

Kern Model DLB 160-3A Moisture Balance

Robust moisture balance for samples up to 160g.

 
Features:
  • Halogen quartz glass heater 400 W
  • Heating temperature range: 35 - 160°C in 1°C increments
  • Weighing range: max. sample weight 160 g.
  • Reproducibility, weight of sample 10g.: 0.05%
  • Read-out: 0.001 g. or 0.01%
  • Single cell weighing technology
  • Backlit LCD display, digit height 17 mm.:
-        unit for displaying the results e.g. % moisture
-        current moisture content in %
-        drying process active
  • Display after drying:
- Moisture (%) = loss in weight of starting weight (0 - 100%)
- Dry mass (%) = residual weight of starting weight (100 - 0%)
- Loss in weight / final weight x 100% (100 - 999%)
- Weight loss (absolute value in g.)
NOTE: Display can be switched at any time
  • Drying modes:
-        standard drying
-        pre-heat level, can be switched on
  • Internal memory for automatic sequence of 5 complete drying processes
  • Switch off criteria:
- when the set time has expired (1 minute to 99 minutes)
- when loss in weight per unit of time falls below the target value (60 seconds)
  • Table of applications: There are many practical examples in the operating instructions
  • Last measured value remains in display until replaced by a new measurement
  • Application table with many practical examples in the operating instructions
  • 10 aluminium sample plates 92 mm. dia. provided (option MLB-A01, pack of 80)
  • Calibration by external weight (not supplied)
  • Multiple weighing units
  • RS232 C data interface for connection to PC or printer
  • Mains adaptor (supplied)
  • Overall dimensions: 210W x 340D x 225H mm.
  • Net weight: approx. 4.2 kg.
  • 3 year warranty
 
Specifications:

 

Model
Weighing range g.
Readability
Heating temp. range
DLB 160-3A
160
0.001g. or 0.01%
35 - 160°C

 

Accessories:

 

Cat. Number
Description
YKB-01N
Standard thermal printer
MLB-A01
Aluminium sample plates 92 mm. dia. (pack of 80)
DLB-A01
Calibration set consisting of measurement sensor and display device
RH-A02
Round fibreglass filter e.g. for samples that splash or become encrusted (pack of 100)
PLJ-A01
Protective working cover
DBS-A02
USB interface (interface cable, driver and software Balance Connection included)

 

 

 
Kern Model DLT Moisture Analyser with innovative Windows CE touch® operating system
 
Features:
  • Innovative touch screen: large touch-sensitive, backlit screen with very good contrast for easy operation and convenient reading
  • Clear menu structure with plain text labels on the display. The menu and processes are self-explanatory. This reduces the training times, avoids operating errors and in this way, ensures more efficient, rapid operation.
  • Colour LCD display, digit height 17 mm., screen diagonal 5.8” (approx. 147 mm.), 118W x 88H mm. with display of following parameters:
1. Drying process active
2. Status bar
3. Current temperature
4. Current moisture content in % / display and print-out of moisture %
5. Residual weight in % (progress bar)
6. Switch off mode
7. Target temperature
8. Type of drying Standard

9. Drying rate

 

 

  • Particularly in the pharmaceutical, food, chemical and construction industries, being able to analyse moisture content of materials at Goods Inwards and production is an important tool to ensure product quality and robust production processes.
  • In biogas plants, sewage treatment plants or landfill sites, the drying of biomass has always been extremely important. Controlling the moisture content precisely helps, for example, to reduce transport weights or increase heating values.
  • In the timber industry, statements which can be validated relating to the moisture content and the resulting mechanical and technological characteristics of the wood or the fuel and heating values of wood chips, pellets, etc. are of economic importance.
  • Graphic display of the drying curve shows the progress of the drying process in real time and can be used by the operator to check and evaluate the result
  • Balance contains memories for automatic sequence of 300 drying programmes (12 free characters for each memory) as well as a further 100 memories for drying processes which have been carried out, which can be recalled individually.
  • Touchless tare function: just give it a wave. Two freely-assignable movement sensors for TARE and/or PRINT.
  • Practical net weighing assistance to defined target value (g) with adjustable tolerance range 1 – 25% of the target value.
  • Halogen quartz glass heater 400W.
  • Simple ‘step-by-step’ user guidance in the display in the following languages: English, German, French, Italian, Spanish and Portuguese.
  • The last value measured remains on the display until it is replaced by a new measurement.
  • 10 sample plates included.
  • Application handbook: there are many practical examples in the operating instructions.
 
Technical specifications:

 

Model
DLT 100-3
Readout
0.001g. / 0.01%
Weighing range (max.)
160g.
Reproducibility, weight of sample 10g.
0.001g.
Display after drying (display can be switched over at any time):
Moisture (%) = weight loss (WL) from start weight (SW)
0 – 100%
Dry mass (%) = residual weight (RW) from start weight (SW)
100 – 0%
ATRO (%) (SG:RG) . 100%
100 – 999%
Weight loss (g.) (WL)
Absolute value in (g.)
Temperature range
35ºC to 160ºC in steps of up to 1ºC
Drying modes
  • Standard drying
  • Drying in levels
  • Gentle drying
  • Pre-heat level, can be switched on
Switch off criteria
  • When the set time has expired (1 – 99 minutes)
  • When the weight loss per unit of time falls below the target value (60 seconds)
Recall of measurement
  • Continuous output (residual weight)
  • At the end of the drying process, manual or automatic (only in connection with Kern YKB-01N printer or PC)
Overall dimensions
210W x 340D x 225H mm.
Dimensions of display device
200W x 150D x 63H mm.
Net weight
5.5 kg.

 

 
Ordering information:

 

DLT 100-3
Kern Model DLT 100-3 Moisture Analyser supplied with 10 aluminium sample plates
Accessories:
MLB-A01
Sample plates, aluminium, 92 mm. dia. (pack of 80)
RH-A02
Round fibre glass filter e.g. for samples that splash or become encrusted (pack of 80)
DLB-A01
Temperature calibration set consisting of measuring sensor and display device
ALJ-A01
Protective working cover
SCD-4.0
Software balance connection
572-926
Interface cable RS-232 to connect an external device
963-127
Optional DKD Calibration Certificate

 

 

 

 
 

 


 
Search
Search Site:
Make an Enquiry
Brochures

   Progen Focus 2017

 

To view the brochures you will need to have Acrobat Reader
 
Site Build and Hosting by Wizzy Design Ltd.  |   Design By Website Optimisation  |   Powered By Apex CMS ©
Kern Moisture Analysers © Progen Scientific. 2020. All Rights Reserved.